Skip to content


  1. Resources for an introduction to modelling June 30, 2011

    Posted in Design processes.

    No comments
  2. How to specify and choose a clutch June 3, 2011

    Posted in Clutches and brakes.

    No comments
  3. Unit selection – electric motor June 3, 2011

    Posted in Motors and actuators.

    No comments
  4. Unit selection – gearbox June 3, 2011

    Posted in Transmissions.

    No comments
  5. How to choose a seal June 3, 2011

    Posted in Machine elements.

    No comments
  6. How to design a shaft when fluctuating loads are to be considered June 3, 2011

    Posted in Shafts and couplings.

    No comments
  7. How to design a shaft for strength and rigidity June 3, 2011

    Posted in Shafts and couplings.

    No comments
  8. How to select rolling element bearings June 3, 2011

    Posted in Bearings.

    No comments
  9. Component selection – chain drives June 3, 2011

    Posted in Transmissions.

    No comments
  10. Specify and choose a planar mechanism June 3, 2011

    Posted in Mechanisms.

    No comments
  11. How to choose a belt drive June 3, 2011

    Posted in Transmissions.

    No comments
  12. How to specify and choose gears June 3, 2011

    Posted in Transmissions.

    No comments
  13. How to define and match elements for a rotary power transmission system June 3, 2011

    Posted in Transmissions.

    No comments
  14. Design systems and select components for bolted joints and thread fasteners June 3, 2011

    Posted in Fasteners.

    No comments
  15. Selecting manufacturing processes June 3, 2011

    Posted in Manufacturing processes.

    No comments
  16. How to identify and specify tolerances and fits GEN 1 June 3, 2011

    Posted in Tolerancing.

    No comments
  17. How to write a product design specification June 3, 2011

    Posted in Specification formulation.

    No comments
  18. Tutor’s guide – cam mechanisms June 3, 2011

    Posted in Mechanisms.

    No comments
  19. Manufacturing phase June 3, 2011

    Posted in Manufacturing processes, Principles of design.

    No comments
  20. Curriculum for design: engineering undergraduate courses June 3, 2011

    Posted in Principles of design.

    No comments
  21. The conceptual design phase June 3, 2011

    Posted in Concept design.

    No comments
  22. Market phase and specification formulation June 3, 2011

    Posted in Specification formulation.

    No comments
  23. Unit design – cam mechanisms June 2, 2011

    Posted in Mechanisms.

    No comments
  24. The detail design phase June 2, 2011

    Posted in Detail design.

    No comments


just a test